1/9 1. scope of application these specifications are applied to the chip type led lamp , model CL-L233-MC13L1 2. part code c l - l 2 3 3 - m c13 l1 series l233 : white power led for general lighting. special specifications m : general color rendering index typ. 85 type. watt class c13 : 13 watt package. lighting color l1 : energy star correlated color temperature 3000(k) approved checked drawn symbol citiled - apr.20.'09 mark date description appro. new implementation name drawing no specifications citizen electronics co.,ltd. CL-L233-MC13L1 ref.ce-p412 03/09
2/9 3. outline drawing 4. performance ( 1 ) absolute maximum rating symbol unit power dissipation pd w forward current i f a forward pulse current i fp a *1 operating temperature t op storage temperature t st junction temperature tj max *2 *1forward current : dutyQ1/10 , pulse widthQ10msec *2 d.c. current : tj = tc + rj-c x pd pulse current : tj = tc + rj-c x pw(power dissipation / one-pulse) x duty approved checked drawn symbol citiled - apr.20.'09 mark date citizen electronics co.,ltd. CL-L233-MC13L1 drawing no new implementation 1.2 -20 +85 120 -30 +100 parameter rating value 17.7 0.84 specifications name description appro. tc measurement point tolerances unless otherwise specified : 0.3mm unit : mm anode cathode ref.ce-p412 03/09
3/9 ( 2 ) electro-optical characteristics ( tc=25 ) symbol condition min typ max unit i r v r =15v - - 100 a r j-c junction-case - 2.4 - /w ra i f =720ma 80 85 - - chromaticity coordinates ( condition : i 0 0 0 0 x y 0.4165 0.3831 0.4307 0.4157 0.4542 0.4242 0.4366 0.3901 0.4165 0.3831 0 0 note 1) the tolerance of measurement at our tester is vf 3% , v10% , chromaticity(x,y)0.01. note 2) for handling ,please apply cmos lsi or equivalent any electrostatic effect. approved checked drawn symbol citiled - apr.20.'09 mark date - 21.0 702 900 17.5 CL-L233-MC13L1 forward voltage luminous flax drawing no name reverse current color rank parameter specifications v f v v lm i f =720ma l1 18.6 new implementation thermal resistance i f =720ma high general color rendering index description appro. citizen electronics co.,ltd. 0.38 0.39 0.40 0.41 0.42 0.43 0.41 0.42 0.43 0.44 0.45 0.46 x y ref.ce-p412 03/09
4/9 5. characteristics forward current vs. relative luminous flux forward current vs. forward voltage forward current vs. chromaticity coordinate case temperature vs. chromaticity coordinate approved checked drawn symbol citiled - apr.20.'09 mark date name description appro. specifications drawing no CL-L233-MC13L1 new implementation citizen electronics co.,ltd. if - chromaticity characteristics tc=25 -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 200 400 600 800 1000 if(ma S x , S y Sx Sy if - v characteristicstc=25 0% 20% 40% 60% 80% 100% 120% 0 200 400 600 800 1000 if (ma v ( a . u ) if - vf characteristicstc=25 88% 90% 92% 94% 96% 98% 100% 102% 0 200 400 600 800 1000 if (ma v f ( a . u ) tc - chromaticity characteristics if=480ma -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0.0 20.0 40.0 60.0 80.0 100.0 120.0 tc( S x , S y Sx Sy ref.ce-p412 03/09
5/9 case temperature vs. forward voltage case temperature vs. relative luminous flux case temperature vs. allowable forward current spectrum approved checked drawn symbol citiled - apr.20.'09 mark date name drawing no citizen electronics co.,ltd. CL-L233-MC13L1 specifications new implementation description appro. tcvfcharacteristicsif=720ma 50% 60% 70% 80% 90% 100% 110% 0 20 40 60 80 100 120 tc() v f ( a . u ) tcvcharacteristicsif=720ma 50% 60% 70% 80% 90% 100% 110% 0 20 40 60 80 100 tc() v ( a . u ) tc-i f characteristics 0 100 200 300 400 500 600 700 800 0 25 50 75 100 125 tc() i f ( m a ) spectrum i f =720m a 0% 20% 40% 60% 80% 100% 120% 350 450 550 650 750 850 wavelength (nm) r e l a t i v e l u m i n o u s ref.ce-p412 03/09
6/9 6. reliability (1)details of the tests (2)judgment criteria of failure for reliability test (ta=25 ) symbol vf v u defines the upper limit of the specified characteristics.s defines the initial value. note1: measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. note2: cl-l221-c14l-b reliability test results will be used for cl-l233-c13n1. approved checked drawn symbol citiled - apr.20.'09 mark date new implementation -30 30minutes - 100 30minutes,100 cycle citizen electronics co.,ltd. test item moisture proof test thermal shock test ta=25 ,if=720ma(tj=72 )1000 hours (with al-fin) ta=50 ,if=720ma(tj=94 )1000 hours (with al-fin) -30 1000 hours 100 1000 hours 602 , 905%rh for 1000 hours forward voltage total luminous flux measuring condition if=720ma if=720ma measuring item high temperature operating life test test condition judgment criteria for failure drawing no >u1.1 CL-L233-MC13L1 specifications room temperature operating life test low temperature storage test high temperature storage test ref.ce-p412 03/09
7/9 7. packing specifications (1) packing *tray (dimensions: 310 200 14.6mm / materials: electrically conductive ps) approved checked drawn symbol citiled - apr.20.'09 mark date specifications one packing includes 200 pieces of led packages. so, packing unit is 200 pieces. drawing no name empty tray are stacked. the empty one tray is put on the top of trays and note : all led packages are placed on the tray individually. one tray includes 40 pieces of led packages. in the packing, five trays filled with led packages and one attached the indication label which specifies product name, quantity, lot number . CL-L233-MC13L1 description appro. citizen electronics co.,ltd. new implementation 310 2 1 0 < packing figure > example of indication label customer type CL-L233-MC13L1 p.no lot no xxxxxx q'ty pcs pass citizen electronics cathode ref.ce-p412 03/09
8/9 precautions 1. avoid the application of any stress to the resin. 2. avoid any contact by a sharp metal nail or other materials with the resin portion. 3. this product should be secured firmly by fastening an m3 screw on both sides of the product. please be careful not to apply any stress to the product during the clamping operation. as the connection status could vary depending on materials of outer heat sink, please check thoroughly. 4. a heat radiating grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. this product could be bent during the clamping operation if heat grease in sheet form is used. for this reason, it is recommended that grease in paste form is used. 5. handling of static electricity - these products are sensitive to static electricity charge. please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - all devices, equipment and machinery must be properly grounded. it is recommended that precautions be taken against surge voltage to the equipment that mounts the leds. ce's lighting inspection criterion - when inspecting the final products in which leds were assembled, it is recommended to check whether the assembled leds are damaged by static electricity or not. it is easy to find static-damaged leds by a light-on test. *light-on test criterion - esd tolerance of this product is 300v (hbm, based on jeita ed-4701 test b). approved checked drawn symbol citiled - apr.20.'09 mark date condition judgmental criterion if=1ma / die no-lighting should not exist. specifications description appro. citizen electronics co.,ltd. CL-L233-MC13L1 name new implementation drawing no 19.5mm 1 1 . 0 m m 19.5mm 1 1 . 0 m m 19.5mm 1 1 . 0 m m resin portion (shaded area) recommended installation screw pitch m3 screw thermal conductive silicone grease outer heat sink spring washer (= 6mm) plane washer (= 6mm) ref.ce-p412 03/09
9/9 precautions (continued) 6. please be aware that this product should not come into contact with other parts in assembled status. 8. heat generation a heat release design is required to use this product efficiently. please ensure that heat generation is not in excess of the absolute maximum rating. (refer to 4-1 performance) 9. recommended soldering of 40w or lower. the temperature of a soldering iron should be adjusted 350c or lower. - no external force is applied to sealing resin during soldering operation. - please do not handle a product until it returns to a normal temperature. note: this product is not adaptable to reflow process. 10. other - this product complies with rohs directives. office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurement hardware and others). in cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. -an agreement of formal product specifications is required prior to mass production. - the specifications and appearance of this product are subject to change without advanced notice. approved checked drawn symbol citiled - apr.20.'09 mark date and when two or more led packages are connected, the series connection between each package is recommended. - please design a circuit that prevents any reverse voltage (excess current) from being - soldering operation should be performed within 3.5 seconds per land using a soldering iron - this product is intended for the application in general electronic devices (such as - as this product is designed with consideration of the heat release property of module, - factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. thus, drive conditions should be taken into consideration, depending on ambient temperature (ta). - our warranty does not cover situations where this product undergoes secondary fabrication such as changes in shape. applied to this product instantaneously when the circuit is on or off. CL-L233-MC13L1 specifications new implementation 7.drive circuit - a constant current circuit is recommended as a drive circuit. description appro. citizen electronics co.,ltd. name drawing no ref.ce-p412 03/09
|
